Pingente Dog Tag Personalizado Ouro Branco

Preço promocionalR$ 950,00
Size Guide
Escolher Size/ Material:
Escolher Chain:
Preço promocionalR$ 950,00
  • Necklace
  • Bracelet
  • Ring
  • NECKLACES VARY BY LENGTH AND CAN BE CHOSEN TO REFLECT PERSONAL PREFERENCE OR STYLE.
    * For Chokers, Add Two Inches To Whatever Your Neck Measurement Is For A Comfortable Fit.

    * Adding Four Inches To Your Neck Measurement Will Give You A Good Length For An Average Necklace, Like A Pendant.
    SHOP NECKLACE>>>
  • INCH CM
    6 15
    6.5 17
    7 18
    7.5 19
    8 20
    8.5 22
    9 23
    9.5 24
    10 25
    CHOOSING A BRACELET SIZE USING ANOTHER BRACELET


    Find a bracelet that fits you correctly. Set it down flat. Measure with a ruler the length from the top of the clasp to the end of the bracelet. Make a note of the measurement. Order your Aporro bracelet in a size as close as possible to this measurement.
    CHOOSING A BRACELET SIZE BY MEASURING YOUR WRIST
    HOW TO USE THE APORRO WRIST SIZER
  • US DIAMETER CIRCUMFERENCE
    5 15.8 mm 49.6 mm
    6 16.5 mm 51.8 mm
    7 17.2 mm 54 mm
    8 18.2 mm 57.2 mm
    9 19.1 mm 60 mm
    10 19.8 mm 62.2 mm
    11 20.6 mm 64.8 mm
    12 21.6 mm 67.9 mm
    13 22.3 mm 70.1 mm
    MEASURE WITH CUT OUT RULER
    STEP 1: OPEN AND PRINT PDF IN 100% SCALE
    Start with opening the pdf file which you find when clicking the 'Ring Measuring PDF'. Make sure the pdf is scaled 100% and then print it.
    Ring Measuring PDF
    STEP 2: CHECK THE PRINTED FILE IS THE CORRECT SIZE WITH A CREDIT CARD
    Check that the printed PDF file is the right size with your credit card or a card that has the same size as a credit card. Place the card in between the two arrows on the upper right-hand side of the paper. If the card fits perfectly in between the arrows you know that the printed PDF is the right size.
    STEP 3: CUT OUT THE MEASURING RULER
    Cut out the measuring stick from your printed measuring guide.
    STEP 4: CUT THE DOTTED LINE
    Make a short cut on the dotted line. Make sure not to cut all the way through, just enough to leave a hole in the paper. To make it easier you can fold the paper in half and cut on the dotted line.
    STEP 5: PULL THE THINNER END THROUGH THE HOLE
    Pull the thinner end of the cut-out ruler through the hole in the paper, so you create a loop with the paper. Make sure that you have the number on the outside so you can read your size.
    STEP 6: SET THE PAPER LOOP ON YOUR FINGER AND TIGHTEN IT UP
    Set the paper loop on your finger, close to your knuckle or where you want the ring to sit. Tighten the loop by pulling the thinner paper end until you feel that it's the correct ring size. You find the ring size number printed on the paper that comes out of the loop. The correct ring size number is the number printed on the line closest to the paper cut hole.
    STEP 7: COMPARE THE SIZE NUMBER WITH THE RING SIZE ON THE PRINTED PDF
    Compare the printed size number on the cut-out ruler with the ring size on the printed pdf. You find the ring size listed under the circles with the printed size numbers inside.
    MEASURE WITH PRINTED PDF
    MEASURE WITH A MEASURING TAPE
    STEP 1: PLACE THE MEASURING TAPE
    Place the measuring tape over your finger and pull it around into a circle.
    STEP 2: ADJUST THE SIZE
    Adjust the size of the circle, move it across your knuckles, and make sure it fits comfortably.
    STEP 3: NOTE THE MEASUREMENTS AND FIND A SIZE
    Take note of the measurements in millimeters and use the comparison chart or measurement guide PDF to find your ring size.
    EU DIAMETER CIRCUMFERENCE
    50 15.8 mm 49.6 mm
    52 16.5 mm 51.8 mm
    54 17.2 mm 54 mm
    56.5 18.2 mm 57.2 mm
    60 19.1 mm 60 mm
    62 19.8 mm 62.2 mm
    64.5 20.6 mm 64.8 mm
    68 21.6 mm 67.9 mm
    70 22.3 mm 70.1 mm
    MEASURE WITH CUT OUT RULER
    1: OPEN AND PRINT PDF IN 100% SCALE
    Start with opening the pdf file which you find when clicking the 'Ring Measuring PDF'. Make sure the pdf is scaled 100% and then print it.
    Ring Measuring PDF
    2: CHECK THE PRINTED FILE IS THE CORRECT SIZE WITH A CREDIT CARD
    Check that the printed PDF file is the right size with your credit card or a card that has the same size as a credit card. Place the card in between the two arrows on the upper right-hand side of the paper. If the card fits perfectly in between the arrows you know that the printed PDF is the right size.
    3: CUT OUT THE MEASURING RULER
    Cut out the measuring stick from your printed measuring guide.
    4: CUT THE DOTTED LINE
    Make a short cut on the dotted line. Make sure not to cut all the way through, just enough to leave a hole in the paper. To make it easier you can fold the paper in half and cut on the dotted line.
    5: PULL THE THINNER END THROUGH THE HOLE
    Pull the thinner end of the cut-out ruler through the hole in the paper, so you create a loop with the paper. Make sure that you have the number on the outside so you can read your size.
    6: SET THE PAPER LOOP ON YOUR FINGER AND TIGHTEN IT UP
    Set the paper loop on your finger, close to your knuckle or where you want the ring to sit. Tighten the loop by pulling the thinner paper end until you feel that it's the correct ring size. You find the ring size number printed on the paper that comes out of the loop. The correct ring size number is the number printed on the line closest to the paper cut hole.
    7: COMPARE THE SIZE NUMBER WITH THE RING SIZE ON THE PRINTED PDF
    Compare the printed size number on the cut-out ruler with the ring size on the printed pdf. You find the ring size listed under the circles with the printed size numbers inside.
    MEASURE WITH PRINTED PDF
    MEASURE WITH A MEASURING TAPE
    STEP 1: PLACE THE MEASURING TAPE
    Place the measuring tape over your finger and pull it around into a circle.
    STEP 2: ADJUST THE SIZE
    Adjust the size of the circle, move it across your knuckles, and make sure it fits comfortably.
    STEP 3: NOTE THE MEASUREMENTS AND FIND A SIZE
    Take note of the measurements in millimeters and use the comparison chart or measurement guide PDF to find your ring size.
  • DESCRIÇÃO
  • AVALIAÇÕES (0)
  • FAQs
5
WRITE A REVIEW
ADD PHOTOS
Sem Revisões

Seu pedido enviado pela Aporro Brasil será entregue no prazo estimado exibido na finalização do pedido. As estimativas de entrega se baseiam na opção de entrega selecionada.

A Aporro Brasil oferece as seguintes opções de entrega:

Entrega padrão (PAC, prazo de 3~7 dias úteis, R$49,99)
Entrega expressa (SEDEX, prazo de 1~3 dias úteis, R$59,99)

Você poderá selecionar a entrega na finalização do pedido. O prazo de entrega é uma estimativa de quanto tempo leva para o item ser entregue após ser enviado. Normalmente, os itens são enviados em até 2 dias úteis após o pedido ser feito. No entanto, pode levar mais tempo, dependendo da disponibilidade do produto e do tempo necessário para processar o pagamento.

Rastrear seu pacote
Após um pedido ser enviado, você pode rastrear seu pacote no site:
http://www.correios.com.br/


O prazo para solicitação de trocas ou devolução é de 30 dias corridos a contar da data de recebimento do pedido. Antes de qualquer procedimento, a troca ou a devolução de qualquer produto deverá ser informada ao nosso atendimento por WhatsApp, Instagram ou e-mail: br@aprro.com

CONDIÇÕES DE DEVOLUÇÃO DE 30 DIAS:

* O prazo para solicitação devolução/cancelamento é de até 14 dias corridos a contar da data de recebimento do pedido.
* O prazo para solicitação de troca é de até 30 dias corridos a contar da data de recebimento do pedido.
* Os produtos devem ser devolvidos em condições novas e revendáveis.
* Produtos devolvidos sem autorização não serão aceitos. Para obter um Formulário de Autorização, entre em contato com equipe de atendimento ao cliente por WhatsApp, Insta ou e-mail:
* Para realizar uma troca por outro tamanho ou outro medelo, o valor da mercadoria será recalculado.
* Não serão aceitadas trocas e devoluções em nenhum caso para todos os produtos personalizados e de ouro maciço.
* A troca poderá ser realizada uma única vez só.
* O frete poderá ser cobrado.

Produtos Personalizados
Não é permitida a troca ou devolução de produtos personalizados.


A Aporro prioriza a qualidade e os valores, não apenas os preços. Todos os nossos produtos são feitos com metais nobres, banhados 5 vezes a ouro 14K, para evitar que as joais escurecerm e oxidam. E completam sua beleza com pedras naturais ou zircônias, e todas recebem acabamento antialérgico.

Embora a qualidade seja comprovada, alguns cuidados são recomendados para que você mantenha a sua peça bonita por mais tempo:

• Evite expor a jóia ao contato de produtos químicos, como mercúrio, cloro, perfumes e materiais para limpeza doméstica. Todos estes elementos podem agir na liga do metal utilizado na produção da peça, alterando sua cor original;
• Tenha maior cuidado com joias cravejadas de pedras. Batidas ou resvalos fortes podem abalar a sua estrutura, fazendo com que as pedras se soltem;
• Existem pessoas as quais o organismo elimina maior quantidade de iodo (ácido úrico), o que pode causar uma alteração na cor do metal.

Contudo, com o passar do tempo, é natural que ocorra um processo de desgaste, devido ao uso. As peças banhadas não podem ter contato com agentes químicos pesados. A perca de pedras cravadas em joias se dá por batidas, quedas ou resvalos fortes que abalam a estrutura da peça.

Limpeza indicada para peças banhadas
Para as peças banhadas, podem tornar-se ligeiramente mais escura quando usada por algum tempo, devido à oxidação natural do material.
Alguns cuidados especiais para trazer brilho para sua joia:
Enxague com água corrente e use uma flanela macia para secar suavemente a sua joia. Seque bem para evitar a oxidação;
Não use qualquer líquido de polimento ou pano de limpeza que contenha limpa-prata, pois o produto químico pode retirar o banho da superfície da joia.


E-Mail:
Whats App: +1 303 261 5202
Instagram DM: @aporro_brazil

PRODUTOS RELEVANTES